Stealth Client Forum

edur0x wrote:I would like to use this Lumber Macro with Trees Spot`s Save, it would be possible?
Here not worked very well taking the Automatic trees then myself would like to getting spots tree.
Sorry my english is bad =/

Example:


SpotCount := 15;

SpotX[1] := 4032
SpotY[1] := 335
SpotX[2] := 4035
SpotY[2] := 338
SpotX[3] := 4031
SpotY[3] := 341
SpotX[4] := 5453
SpotY[4] := 1502
SpotX[5] := 5457
SpotY[5] := 1502
SpotX[6] := 5461
SpotY[6] := 1502
SpotX[7] := 5462
SpotY[7] := 1498
SpotX[8] := 5462
SpotY[8] := 1493
SpotX[9] := 5458
SpotY[9] := 1493
SpotX[10] := 5454
SpotY[10] := 1493
SpotX[11] := 5450
SpotY[11] := 1493
SpotX[12] := 5446
SpotY[12] := 1493
SpotX[13] := 5442
SpotY[13] := 1493
SpotX[14] := 5442
SpotY[14] := 1489
SpotX[15] := 5446
SpotY[15] := 1489

can you give a wider explanation? You want to write x,y of every tree by yourself?

drabadan wrote:

edur0x wrote:I would like to use this Lumber Macro with Trees Spot`s Save, it would be possible?
Here not worked very well taking the Automatic trees then myself would like to getting spots tree.
Sorry my english is bad =/

Example:


SpotCount := 15;

SpotX[1] := 4032
SpotY[1] := 335
SpotX[2] := 4035
SpotY[2] := 338
SpotX[3] := 4031
SpotY[3] := 341
SpotX[4] := 5453
SpotY[4] := 1502
SpotX[5] := 5457
SpotY[5] := 1502
SpotX[6] := 5461
SpotY[6] := 1502
SpotX[7] := 5462
SpotY[7] := 1498
SpotX[8] := 5462
SpotY[8] := 1493
SpotX[9] := 5458
SpotY[9] := 1493
SpotX[10] := 5454
SpotY[10] := 1493
SpotX[11] := 5450
SpotY[11] := 1493
SpotX[12] := 5446
SpotY[12] := 1493
SpotX[13] := 5442
SpotY[13] := 1493
SpotX[14] := 5442
SpotY[14] := 1489
SpotX[15] := 5446
SpotY[15] := 1489

can you give a wider explanation? You want to write x,y of every tree by yourself?

Exactly, i would like to mark the points (SPOTS x,y) of the trees one by one

are your trees static tiles?

nah nah wrote:are your trees static tiles?

No..its normal trees but with automatic macro i have this problem:

18:03:44:731 [lumber]: MoveXYZ: Destination X/Y value = 0 - Check your script! MoveXYZ failed!
18:09:29:369 [lumber]: MoveXYZ: Destination X/Y value = 0 - Check your script! MoveXYZ failed!
18:13:09:350 [lumber]: MoveXYZ: Destination X/Y value = 0 - Check your script! MoveXYZ failed!
18:16:56:201 [lumber]: MoveXYZ: Destination X/Y value = 0 - Check your script! MoveXYZ failed!
18:20:35:725 [lumber]: MoveXYZ: Destination X/Y value = 0 - Check your script! MoveXYZ failed!
18:27:20:102 [lumber]: MoveXYZ: Destination X/Y value = 0 - Check your script! MoveXYZ failed!
18:32:38:468 [lumber]: MoveXYZ: Destination X/Y value = 0 - Check your script! MoveXYZ failed!
18:36:17:649 [lumber]: MoveXYZ: Destination X/Y value = 0 - Check your script! MoveXYZ failed!

Do you have the green line? (blue arrow)

ой ё, как теперь жить со смещенным чекбоксом?

nah nah wrote:Do you have the green line? (blue arrow)

Its ok bro.. green =)
I dont understand what u say in red text.. english pls?

tkz

"Vizitor, looks - this checkbox location changed!!!"

Vizit0r wrote:"Vizitor, looks - this checkbox location changed!!!"

На скрине 7 версия, когда будет релиз?

когда я его доделаю
постоянно находится что еще перелопатить\добавить\изменить

Интересно, а чем лучше отыскивать деревья по типам, чем по флагу $20000?

Подскажите, в чем может быть проблема? Запускаю скрипт, чар обходит точки вырубки, подходит к 1 дереву, рубит его, далее стоит на месте и пишет, что цель слишком далеко.
Сообщения под свой сервер поменял, но возможно что-то напутал...

Вот журнал:
[17:51:58:731] System: You start lumberjacking...
[17:52:02:732] System: Failed.
[17:52:05:734] System: You start lumberjacking...
[17:52:05:952] System: There's no wood here to chop...
[17:52:06:237] System: I am already performing another action.
[17:52:06:249] System: You are stuffed
[17:52:06:692] System: I am already doing something else.
[17:52:06:819] System: You stop lumberjacking.
[17:52:07:635] System: Select a tree to chop.
[17:52:07:853] System: That is too far away.
[17:52:08:585] System: Select a tree to chop.
[17:52:08:887] System: That is too far away.
[17:52:09:242] System: Select a tree to chop.
[17:52:09:534] System: That is too far away.
[17:52:09:885] System: Select a tree to chop.
[17:52:10:191] System: That is too far away.


Вот часть скрипта:
// Журнал
Msg1 = 'переместили';
Msg2 = 'That is too far away';
Msg3 = 'hack';
Msg4 = 'You stop lumberjacking';
Msg5 = 'no wood here to chop...';
Msg6 = 'appears immune';
Msg7 = 'Try chopping';
Msg8 = 'reach this';

Vitalius wrote:Подскажите, в чем может быть проблема? Запускаю скрипт, чар обходит точки вырубки, подходит к 1 дереву, рубит его, далее стоит на месте и пишет, что цель слишком далеко.
Сообщения под свой сервер поменял, но возможно что-то напутал...

Вот журнал:
[17:51:58:731] System: You start lumberjacking...
[17:52:02:732] System: Failed.
[17:52:05:734] System: You start lumberjacking...
[17:52:05:952] System: There's no wood here to chop...
[17:52:06:237] System: I am already performing another action.
[17:52:06:249] System: You are stuffed
[17:52:06:692] System: I am already doing something else.
[17:52:06:819] System: You stop lumberjacking.
[17:52:07:635] System: Select a tree to chop.
[17:52:07:853] System: That is too far away.
[17:52:08:585] System: Select a tree to chop.
[17:52:08:887] System: That is too far away.
[17:52:09:242] System: Select a tree to chop.
[17:52:09:534] System: That is too far away.
[17:52:09:885] System: Select a tree to chop.
[17:52:10:191] System: That is too far away.


Вот часть скрипта:
// Журнал
Msg1 = 'переместили';
Msg2 = 'That is too far away';
Msg3 = 'hack';
Msg4 = 'You stop lumberjacking';
Msg5 = 'no wood here to chop...';
Msg6 = 'appears immune';
Msg7 = 'Try chopping';
Msg8 = 'reach this';

Ребят, помогите, пожалуйста! Пробовал ставить разные версии стелза, менял сообщения, кол-во точек, координаты. Но результат один - рубит одно и то же дерево, а к остальным не ходит.

Vitalius wrote:

Vitalius wrote:Подскажите, в чем может быть проблема? Запускаю скрипт, чар обходит точки вырубки, подходит к 1 дереву, рубит его, далее стоит на месте и пишет, что цель слишком далеко.
Сообщения под свой сервер поменял, но возможно что-то напутал...

Вот журнал:
[17:51:58:731] System: You start lumberjacking...
[17:52:02:732] System: Failed.
[17:52:05:734] System: You start lumberjacking...
[17:52:05:952] System: There's no wood here to chop...
[17:52:06:237] System: I am already performing another action.
[17:52:06:249] System: You are stuffed
[17:52:06:692] System: I am already doing something else.
[17:52:06:819] System: You stop lumberjacking.
[17:52:07:635] System: Select a tree to chop.
[17:52:07:853] System: That is too far away.
[17:52:08:585] System: Select a tree to chop.
[17:52:08:887] System: That is too far away.
[17:52:09:242] System: Select a tree to chop.
[17:52:09:534] System: That is too far away.
[17:52:09:885] System: Select a tree to chop.
[17:52:10:191] System: That is too far away.


Вот часть скрипта:
// Журнал
Msg1 = 'переместили';
Msg2 = 'That is too far away';
Msg3 = 'hack';
Msg4 = 'You stop lumberjacking';
Msg5 = 'no wood here to chop...';
Msg6 = 'appears immune';
Msg7 = 'Try chopping';
Msg8 = 'reach this';

Ребят, помогите, пожалуйста! Пробовал ставить разные версии стелза, менял сообщения, кол-во точек, координаты. Но результат один - рубит одно и то же дерево, а к остальным не ходит.

шард? а он вообще ходит? а деревьев сколько собирает?

drabadan wrote: шард? а он вообще ходит? а деревьев сколько собирает?

шард ZHR
Он сначала обходит все точки, собирает координаты деревьев (получается 40+). Потом идёт к первому, вырубает его полностью. Дальше, как я понимаю, он начинает перебирать остальные деревья, стоя на месте и пишет, что они далеко. После того как переберет все, снова рубит первое.